SENSORS AND SPARE PARTS FOR CONTROL UNITS
TheTrolmaster EFC-1 is specially designed to be used with the Tent-X control system to control the speed of the variable EC fan. The EFC-1 has to select the output mode to control the EC fan in PWM...
TrolMaster's Hydro-X system can control most horticultural lighting fixtures sold on the market today. Most lighting manufacturers offer the possibility of controlling their lighting systems using...
The Trolmaster ECS-9 is a 4-pin RJ12 connector cable designed for connection between the ThinkGrow LED Lighting Control Adapter T (LMA-T ) and AEROFAN line vacuum cleaners equipped with threaded...
The ECS-3 provides a 5/8" diameter connector for some of the Fluence brand LED fixtures that use threaded waterproof connectors for interconnection. Like the other ECS kits, the ECS-3 comes with a...
The ECS-5 provides a 5/8" diameter connector for some of the new Fluence brand LED fixtures that use PushLock waterproof connectors for interconnection. Like the other ECS kits, the ECS-5 comes with...
The ECS-4 extension cable is simply a 16-foot extension cable for use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main...
The ECS-6 extension cable is simply a 16-foot extension cable for use with the WCS-1 humidity control sensor. It has one male and one female end and can increase the distance between the WCS-1 module...
The extension cable is simply a 1.2 metre RJ12 extension cable. Package contents: 1 extension cable 1.2m feet (4ft)
The extension cable is simply a 4.8 metre RJ12 extension cable. Package contents: 1 x 4.8m feet (6ft) extension cable
The CO2 Emergency Shutdown Station DSE-1 provides a simple method of shutting down the CO2 supply when a fault or high CO2 level is detected. It is a controlled 120 V outlet that provides power to...
TrolMaster's SPH-1 splitter hub makes the installation of our controllers as easy as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12...
The DFM-1 is a 1" inline digital flow meter that provides accurate measurements of water or nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.When...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...
TheTrolmaster EFC-1 is specially designed to be used with the Tent-X control system to control the speed of the variable EC fan. The EFC-1 has to select the output mode to control the EC fan in PWM...
TrolMaster's Hydro-X system can control most horticultural lighting fixtures sold on the market today. Most lighting manufacturers offer the possibility of controlling their lighting systems using...
The Trolmaster ECS-9 is a 4-pin RJ12 connector cable designed for connection between the ThinkGrow LED Lighting Control Adapter T (LMA-T ) and AEROFAN line vacuum cleaners equipped with threaded...
The ECS-3 provides a 5/8" diameter connector for some of the Fluence brand LED fixtures that use threaded waterproof connectors for interconnection. Like the other ECS kits, the ECS-3 comes with a...
The ECS-5 provides a 5/8" diameter connector for some of the new Fluence brand LED fixtures that use PushLock waterproof connectors for interconnection. Like the other ECS kits, the ECS-5 comes with...
The ECS-4 extension cable is simply a 16-foot extension cable for use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main...
The ECS-6 extension cable is simply a 16-foot extension cable for use with the WCS-1 humidity control sensor. It has one male and one female end and can increase the distance between the WCS-1 module...
The extension cable is simply a 1.2 metre RJ12 extension cable. Package contents: 1 extension cable 1.2m feet (4ft)
The extension cable is simply a 4.8 metre RJ12 extension cable. Package contents: 1 x 4.8m feet (6ft) extension cable
The CO2 Emergency Shutdown Station DSE-1 provides a simple method of shutting down the CO2 supply when a fault or high CO2 level is detected. It is a controlled 120 V outlet that provides power to...
TrolMaster's SPH-1 splitter hub makes the installation of our controllers as easy as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12...
The DFM-1 is a 1" inline digital flow meter that provides accurate measurements of water or nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.When...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...