TROLMASTER SENSORS AND SPARE PARTS
The TrolMaster Grow Camera (TC-1) is a high quality surveillance camera designed specifically for grow rooms, providing 24/7 real-time video monitoring of your grow area.It is specifically designed...
TrolMaster's SPH-1 splitter hub makes the installation of our controllers as easy as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12...
The DFM-1 is a 1" inline digital flow meter that provides accurate measurements of water or nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.When...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...
The optional WD-2 water detector allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water...
The BM-1 waterproof box is designed to protect the TrolMaster TS-1/2, HS-1 and ARS-1 controllers from water drops and low-pressure water spray.Package contents: 1 x waterproof box (BM-1)
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical...
The OA6-24 control board is designed to control multiple 24vac solenoid valves. It provides a simple and efficient method to control up to 6 valves each with individual timer settings. Up to 5...
The AMP-3 sensor board can be used as a bridge between the sensors (pH sensor and EC/Temp sensor) and the Aqua-X Pro controller.It is specially designed for the Aqua-X Pro system. It can be connected...
The AMP-2 connects the Aqua-x to a set of precision pH / EC and temperature probes to continuously measure the pH / EC and temperature of the water to be sampled. The AMP-2 works with the TrolMaster...
3-in-1 temperature / humidity / light sensor for the Hydro-X system. Sensors must remain dry and clean to avoid premature failure. Do not spray foreign substances or leave water or condensation on...
The optional CO2 sensor (MBS-S8) measures CO2 PPM within the cultivation area. Using MBS-S8 allows users to connect and control their own supplementary CO2 system using Hydro-X. Used in combination...
Monitoring the growing medium for proper water content and EC is an important factor in high-yield cultivation applications. TrolMaster understands that today's method of 'crop direction' involves...
The TrolMaster Grow Camera (TC-1) is a high quality surveillance camera designed specifically for grow rooms, providing 24/7 real-time video monitoring of your grow area.It is specifically designed...
TrolMaster's SPH-1 splitter hub makes the installation of our controllers as easy as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12...
The DFM-1 is a 1" inline digital flow meter that provides accurate measurements of water or nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.When...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...
The optional WD-2 water detector allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water...
The BM-1 waterproof box is designed to protect the TrolMaster TS-1/2, HS-1 and ARS-1 controllers from water drops and low-pressure water spray.Package contents: 1 x waterproof box (BM-1)
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical...
The OA6-24 control board is designed to control multiple 24vac solenoid valves. It provides a simple and efficient method to control up to 6 valves each with individual timer settings. Up to 5...
The AMP-3 sensor board can be used as a bridge between the sensors (pH sensor and EC/Temp sensor) and the Aqua-X Pro controller.It is specially designed for the Aqua-X Pro system. It can be connected...
The AMP-2 connects the Aqua-x to a set of precision pH / EC and temperature probes to continuously measure the pH / EC and temperature of the water to be sampled. The AMP-2 works with the TrolMaster...
3-in-1 temperature / humidity / light sensor for the Hydro-X system. Sensors must remain dry and clean to avoid premature failure. Do not spray foreign substances or leave water or condensation on...
The optional CO2 sensor (MBS-S8) measures CO2 PPM within the cultivation area. Using MBS-S8 allows users to connect and control their own supplementary CO2 system using Hydro-X. Used in combination...
Monitoring the growing medium for proper water content and EC is an important factor in high-yield cultivation applications. TrolMaster understands that today's method of 'crop direction' involves...