CLIMATE CONTROL
The ECS-3 provides a 5/8" diameter connector for some of the Fluence brand LED fixtures that use threaded waterproof connectors for interconnection. Like the other ECS kits, the ECS-3 comes with a...
The ECS-5 provides a 5/8" diameter connector for some of the new Fluence brand LED fixtures that use PushLock waterproof connectors for interconnection. Like the other ECS kits, the ECS-5 comes with...
The ECS-4 extension cable is simply a 16-foot extension cable for use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main...
The ECS-6 extension cable is simply a 16-foot extension cable for use with the WCS-1 humidity control sensor. It has one male and one female end and can increase the distance between the WCS-1 module...
The extension cable is simply a 1.2 metre RJ12 extension cable. Package contents: 1 extension cable 1.2m feet (4ft)
The extension cable is simply a 4.8 metre RJ12 extension cable. Package contents: 1 x 4.8m feet (6ft) extension cable
The CO2 Emergency Shutdown Station DSE-1 provides a simple method of shutting down the CO2 supply when a fault or high CO2 level is detected. It is a controlled 120 V outlet that provides power to...
The TROLMASTER - GREEN-X CONTROLLER GCS-1 is an intelligent greenhouse control system designed to offer comprehensive environmental monitoring and automated management of key cultivation parameters....
TrolMaster's SPH-1 splitter hub makes the installation of our controllers as easy as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12...
TrolMaster's Hydro-X controller is a professional-grade single-zone environmental system. It is fully customisable and modularly designed. Installation is simple and the system is easy to expand.The...
TrolMaster's Hydro-X Pro is a professional single-room environmental controller. The Hydro-X Pro expands the capabilities of the original Hydro-X by allowing up to 50 sensors and up to 50 separate...
The DFM-1 is a 1" inline digital flow meter that provides accurate measurements of water or nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.When...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...
The ECS-3 provides a 5/8" diameter connector for some of the Fluence brand LED fixtures that use threaded waterproof connectors for interconnection. Like the other ECS kits, the ECS-3 comes with a...
The ECS-5 provides a 5/8" diameter connector for some of the new Fluence brand LED fixtures that use PushLock waterproof connectors for interconnection. Like the other ECS kits, the ECS-5 comes with...
The ECS-4 extension cable is simply a 16-foot extension cable for use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main...
The ECS-6 extension cable is simply a 16-foot extension cable for use with the WCS-1 humidity control sensor. It has one male and one female end and can increase the distance between the WCS-1 module...
The extension cable is simply a 1.2 metre RJ12 extension cable. Package contents: 1 extension cable 1.2m feet (4ft)
The extension cable is simply a 4.8 metre RJ12 extension cable. Package contents: 1 x 4.8m feet (6ft) extension cable
The CO2 Emergency Shutdown Station DSE-1 provides a simple method of shutting down the CO2 supply when a fault or high CO2 level is detected. It is a controlled 120 V outlet that provides power to...
The TROLMASTER - GREEN-X CONTROLLER GCS-1 is an intelligent greenhouse control system designed to offer comprehensive environmental monitoring and automated management of key cultivation parameters....
TrolMaster's SPH-1 splitter hub makes the installation of our controllers as easy as plugging in a telephone cable. The SPH-1 hub uses a single RJ12 cable input jack and provides (8) individual RJ12...
TrolMaster's Hydro-X controller is a professional-grade single-zone environmental system. It is fully customisable and modularly designed. Installation is simple and the system is easy to expand.The...
TrolMaster's Hydro-X Pro is a professional single-room environmental controller. The Hydro-X Pro expands the capabilities of the original Hydro-X by allowing up to 50 sensors and up to 50 separate...
The DFM-1 is a 1" inline digital flow meter that provides accurate measurements of water or nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.When...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...